Edwards SIGA-IM2 Isolator ModuleThe Edwards SIGA IM2 Isolator Module is an addressable device that protects a signaling line circuit (SLC) from a to wire to wire short. The SIGA IM2 module monitors line voltages and opens the data to detect a short, isolating the short between the two modules located closest to the short. The loop controller assigns an address to the SIGA IM module. The module uses one detector address on the SLC. Automatic short circuit isolation between Signature

Proper wire gauges should – used

the use of the magnet test feature improves installation efficiency

Remote LED IndicatorThis base includes a built-in remote LED

Significant development efforts employing this new technology have given rise to a new benchmark in strobe performance – FullLight technology

PS-DA conventional pull stations are non-coded manual pull stations which provide a fire alarm control panel (FACP) with a single alarm initiating input signal

A ribbon cable connects the 3-CPU directly to the 3-FIBMB2 fiber interface card

Activated by the i3 loop test and maintenance module

SK-2/SK-4 fire alarm control panel (FACP) module options include transmitter modules

Operating Humidity Range: 10% to 93% Relative Humidity

The SIGA-MCT2 is part of the UIO family of plug-in Signature Series modules

with clear lens

displays the sensitivity of i3 detectors in terms of percent-per-foot obscuration